Hobby Thoughts: Warhammer 40k's Eight Edition

Hello friends,

So with the arrival of the eighth edition of Warhammer 40k my gaming group is officially hot for the grimdark. There are multiple people building and painting new armies and Element Games has been so overwhelmed with orders that I ended up doing a day of work for them to help out. The hype for the new system has been absolutely wild and I've definitely got caught up in.

I was sorely tempted to start a new army but I made the more responsible choice of coming back to the Ork army I painted in the first half of 2016. I'm working to finish some backlog in a unit of Meganobz and Gretchin I assembled and airbrushed last year before stepping away from 40k. I've also purchased another trukk and some more boyz to make a unit of Tankbustas.

Partially completed Meganobz from last year.

A rokkit pistol conversion for a unit of Tankbustas.

Some initial Tankbustas that have since expanded into a unit of 10.

I can't say I'm thrilled about the prospect of painting another 20+ models for a GW system again, but I did get a game of the new rules in and I was impressed enough that I feel it will be worth it. I'll be temporarily putting my Infinity JSA army on the backburner as I wasn't enjoying painting them nearly as much as the Haqqislam forces, which will continue to be a priority for me in tandem with my 40k army.

The game I had was against a friend's Mechanicus army and I got absolutely slaughtered, inflicting a grand total of three wounds for the entire game while he wiped my whole army of 50+ orks. (to be fair I caused about five wounds on some Kastellan's but they kept getting fixed) Even though the game was pretty brutal it was largely down to my own player errors, and also not realising just how differently everything plays now. This was particularly noticeable in the way in which characters have changed, as I flung my warboss away to no benefit quite early in the game.

The rules are definitely very streamlined and the game ran very smoothly. They've taken the best aspects of Age of Sigmar and kept the nuances inherent to 40k, and overall i'm very impressed with how it played.

Deployment. I ended up with the first turn.

My warboss and biker buddies failing to charge a unit of Kastellans.

My warboss subsequently getting absolutely krumped by said Kastellans.

This image pretty much perfectly sums up the game...
hordes of useless small arms fire against an unstoppable group of big buff robots.

Some shooting and a charge later there was nothing left.

Here are some general first impressions about the new edition:

• The game is quick, streamlined, fun, and still really nuanced with a lot of depth. The system is solid and I enjoyed playing it far far more than anything I'd experienced in 7th edition.
• Lists need to be a lot more focused. Since most units are quite viable with the current indexes it feels like you can no longer take a random assortment of your 'best' units an expect a win. My army didn't feel synergistic and I didn't have a plan and it really showed.
• The 'battle points' system didn't feel very balanced. We used the BP system in order to set up the game quickly and my opponent had 69 points while I had 70. However in practice it felt somewhat unbalanced, as Orks don't have a lot of weapon upgrades to take advantage of for 'free' using this system whereas my opponent had some horrific firepower. One gun would have caused over ten wounds on my trukk in a single shot were it not for a lucky ramshackle roll to make it only eight. I will definitely only be playing with proper 'matched play' point values moving forward.
• Characters are fundamentally different both in terms of how they play and how they are positioned on the board. The new targeting rules means that even combat-focused characters will want to be 'bubble-wrapped' with screens of units in front of them, and in general I noticed less overall damage output from characters. The way that their command auras work is a lot more reminiscent of AoS now and it feels like there's a stronger emphasis on them as supporting units. For example my warboss now has a 'waaagh' buff every turn but it only affects units in perimeter around him, rather than having an army-wide buff that he can only use once per game. It makes for a hugely different unit!
• I've seen a lot of people talking about how Orks have been 'fixed' in this edition after being relatively weak throughout 7th, and there are aspects of it I agree with and aspects I don't. The new mob rule definitely makes an enormous difference in improving our moral, but at the same time it also felt like my overall damage and surviveability was significantly reduced. It looks like huge hordes of boys is going to be a really viable strategy but that's not the type of army I want to build or paint so it might prove challenging to produce a viable alternative. I'm optimistic about Orks in the new edition but I think we may struggle against heavy armour lists.
• In terms of defence: the elimination of jink saves, and the nerfing of cover saves to providing a flat +1 armor bonus means that all of the Ork footsloggers and fast attack options are much more fragile.
• When it comes to offence it appears that Power Klaws are nowhere near as efficient as they once where, which was previously my go-to method of taking out anything bigger than infantry. The new rules for "rend" regarding armor saves means that elite units will still be getting decent saves when they're getting hit with a klaw, despite them having a relatively high rend of -3. For example the Kastellan's in this game were buffed to have 1+ armor saves so they were still getting a 4+ armour save when my bosses and nobs were hitting them. It looks like Big Choppa's will be the new hotness, as their damage output is just as consistent for less of a cost.

Anyways those are my initial thoughts. I look forward to getting some more games in soon, and until then thanks for looking!

How to: Paint a Mosaic Resin Base

Hello friends!

I don't think I've ever been as happy with my basing as what I've developed for my Haqqislam Infinity forces. These bases are  satisfying to paint, look fantastic, and best of all are quick and easy to do! The techniques I use here can be employed for any sort of textured resin base, and I hope you find them useful!

For this army I'm using the Micro Arts Studios 'mosaic' resin bases. These are great quality casts with some lovely subtle texture to them that this process really brings out.

Step #1: Select bases and drill holes. First I choose which base will be used for which figure. Situate the model on it during assembly and drill holes in the base to mark where the pins will be. I note which figure goes in which slot by writing in permanent marker on the underside of the base. Then undercoat the bases with your preferred color using a rattlecan, I went with Games Workshop's "Mournfang Brown" spray.

Step #2: Base colors. Using an airbrush I went over the entire base in with Vallejo Model color's "Sand Yellow". It took about 3 coats to get a nice strong tone across it, working off of a brown undercoat. I then used a brush and painted sections of the mosaic using Games Workshop's "Stegadon Scale Green" and "Doombull brown".

Bases after step two.

Step #3: First layer of shade. I used Scale 75 "Inktense wood" wash through the airbrush to get this first layer. I sprayed this almost parallel to one section on the side of the base in order to have the ink catch the raised edges of the base texture. The Scale 75 washes are very strong and even with this limited usage you get a lovely tint out of the base layer of paint.

These are the same bases after the first shade. Note how there's a lot more ink on the side of the base in the top right than there is on the base itself. This is because I only wanted it to skim the top and was spraying most of the ink on the side of the base to help control the amount going over the top.

Step #4: Second layer of shade. I used the exact same airbrush technique only this time using Army Painter "Strong Tone" wash, which is a very natural tone to bring everything together. Once again I focused my spray against the side of the base in the exact same spot as the previous shade in order to only skim the top of the base and draw out its texture.

Bases after step three.

Step #4: Detail work. Once the second shade has fully dried, paint the rims of the base black, and do some edge highlighting around only the outer rim of the base to make things pop a bit. I didn't bother doing any edge highlighting inside the base as I knew I was about to use pigments anyways.

Step #5: Varnish bases. This is really important because we'll be wiping the bases down with water when we use pigments and the inks and washes will absolutely be wiped off in the process if you haven't varnished it. I used Army painter "Aegis suit" rattlecan varnish but you can use any sort of satin or gloss varnish that offers decent protection against water.

Step #6: Pigments. Use vallejo's "Burnt Sienna" pigment and mix it with a bit of water to get it nice and sludgy. It should be thick enough that it doesn't run when you put it on a flat surface, but runny enough that it still falls into and fills the gaps of the bases. Using a cheap brush you slam this mixture into all the crevices of the base. Have fun and be as messy as you want, none of the pigment on the surface will be staying there.

Bases after step six. Pigment spackled into the cracks.

Step #7: Wipe away the pigment. This is the funnest part of the process! Dampen a cloth or piece of paper towel a bit and literally wipe off the tops of each base. After 1-3 passes all of the pigment on the surface will have disappeared but the pigment in the cracks will remain. Your varnish will protect your previous work from getting wiped off. It's sooooo satisfying.

However you need to ensure the previous layer of pigment has completely dried, preferably overnight, before doing this. Otherwise you might remove some of the pigment in the cracks!

Finished bases after the pigment has been wiped away.

Step #8: Final varnish. After giving the remaining pigment another chance to fully dry (it doesn't need quite as long this time) you should do one more layer of varnish to set it in place and voila, mosaic bases! The varnish will also help protect your work if you decide to paint your figures after they're attached to their bases as I do. Any stray paint that gets on the base can be wiped off with water without issue thanks to the varnish.

My test model getting painted on top of a completed base. Looking good!

These techniques should work well for any sort of textures resin base! I hope it has proved useful!😄

Update XI: Haqqislam Forces, Test Schemes, and Chipping Experiments

Hello friends!

It's been a little under two months since my last update so I thought I'd let you know what I've been up to hobby-wise since the start of May.

1. Finished getting my Infinity JSA army tabletop-ready.

First I focused on finishing the bases and getting an airbrush and some base layers down on the two remaining models for my JSA forces. With a layer of varnish these two were up to snuff with the rest of the army and ready to use on the tabletop while I finished their brushwork.

My Oniwaban proved to be an incredibly effective attacker in my first two games with him. Really cool high-risk/high-reward unit!

However instead of being satisfied with my JSA army and getting down to finishing them off with brushwork I instead completely shifted gears and began assembling and prepping a non-sectorial (aka 'vanilla') Haqqislam force.

Even now it's entirely unclear to me why I did this beyond liking the faction and having the Red Veil forces available to me. I really am a glutton for punishment...

2. Assembled and started prepping a Haqqislam army for the tabletop.

I supplemented the red veil box with a box of naffatuns and this, in tandem with the Knauf mercenary sniper I got with the recent infinity Manga, will make a solid 300 point Haqq list. However it added about thirteen more figures to paint on top of my eleven JSA units.

The current painting backlog, about 24 figures. :/

Consequently instead of having one finished army I now have two partially finished ones and lots of brushwork to do. Thankfully the Haqq bases are now almost entirely done and the figures are airbrushed so at least I'll be able to use both on the tabletop.

3. Initial models for both JSA and Haqqislam armies

Once I settle on a color scheme for an army I always get an initial test model to at least 70% completion with the colors I've chosen so i'm aware of any particular challenges that the combination of paints or colors might offer me. For my Haqqislam forces this was a female Ghulam line trooper.

Initial basecolors down over a completed base. I've uploaded a detailed basing tutorial seen here.

Haqqislam troops look somewhat less "high-tech" than other factions and I wanted to use earthy tones to reflect that realism while still keeping the colours bright and punchy on the tabletop. I settled on cream-coloured armour with green clothing  accompanied by some dark blue spot colours.

Working on this model proved really useful, particularly in regards to how to approach the cream armor, as I realised that doing white zenithal highlights on the airbrush beforehand was a pointless step. Definitely a time saver in the long run!

I also made my first attempt at doing a really simple NMM effect with two shades of metal over the black basecoat on the weapon. I am SO pleased with the result, which actually a lot faster than doing a full bascoat of true metal. This is probably the first time I've felt like my metal tones look good.

The current state of the model after further work. Armor and weapon are basically finished here but the skin, green, and blue have all yet to have any highlight/shading.

Rear view.

I'm definitely really pleased with the overall effect of my color scheme and it's been a lot of fun to paint.

I had already got to this point with a JSA test model, but continued to work on the Doctor figure in order to finalise my approach. I'm only somewhat happy with the result but this told me a couple things about the process that i'll keep in mind for the remaining figures. Specifically how to approach highlighting the puffy pants and also that the red armour doesn't really need a glaze to get the most out of it.

Front view. Armor, weapon, and pants pretty much done here. Skin, hair, and brown spot colors need a lot more stuff going on .Haven't evne gotten around to base coating some of the straps yet.

rear view

4. Chipping experiment on Haqqislam Heavy Infantry

One of the Haqqislam units from the Red Veil box is encased head-to-toe in armour, and I wanted to try something different to set him apart from the others. I decided to use some chipping medium to give him a really weathered look as I'd done on my Gorkanaut around this time last year.

I won't go through a detailed step by step process but I undercoated him with a rattlecan, then sprayed him down with "doombull brown" through the airbrush. I varnished that layer, and then gave it two coats of Vallejo's "Chipping Medium" which comes in a dropper bottle.

Over the chipping medium I airbrushed him with the cream colour from my colour scheme, along with some basic airbrush zenithal shading and highlighting.

How he looked before I started chipping.

I did some spot colors using the greens and blues from the rest of color scheme to add some flavor, and then began the chipping process.

I started using water and a toothpick to chip away at the top layer. However I quickly became very frustrated with the way the Vallejo "chipping medium" behaved.

With the Gorkanaut I had used AK interactive "Worn Effect", which is used the exact same way as chipping medium. However the AK interactive effect has a lot more grip, and while it takes a lot more effort to remove the top layer of paint, it gives you lots of tiny chips which makes for a really realistic rust effect. I ended up using a toothbrush to rub down my Gorkanaut and I was really pleased with the effect.

Unfortunately with the Vallejo chipping medium it was way easier to take off the top layer, so that my initial use of a toothbrush took off almost all of the colour on the side of his right leg. It was very frustrating and upsetting. After letting it dry and fixing up the leg as best I could withe some sponging I stuck to using a toothpick and carefully picked off large flakes of the armour. The takeaway here is that Chipping medium gives you very big chips.

The result doesn't look very natural and makes him look "spotted" rather than actually worn down from use. I can see chipping like this looking fine on tanks, but on an infantry model at this scale you really need to use something else if you want a realistic worn effect with lots of little chips. Another possible solution is to only use one layer of chipping medium rather than two, and also spending more time in the chipping process to get it looking more natural. I admit I was so disappointed I sort of rushed this a bit.

The same model after the initial chips, note the fixes on the side of his right leg from where I took off too much of the top layer.

Thankfully this guy isn't my favourite model ever and I don't expect he'll be getting a ton of table time once my forces expand, so I was happy to just say "lesson learned" and move on. I did give him a bit of sponge weathering before gluing him to his base, and I plan to give him some oil washes which will help tie in the overall look and make things a lot more natural.

After some sponging on the legs and being glued to his base.

Rear view.

Front view. It looks quite sloppy here but once the details are picked out it will look a lot more cohesive.

I'm looking forward to doing something similar with Haqqislam's other heavy infantry unit but using the AK interactive effect rather than Vallejo. I expect it will look much much better!

5. Played some games!

I've actually been playing Infinity quite regularly at my local and I'm really pleased that my hobby work is being used on the tabletop so frequently! There's currently a large casual campaign being run by Corvus Belli and Beasts of War called "Strikezone Wotan" that is really encouraging people to get out and play. People upload battle reports for various theatres of war which impact the overall narrative of the campaign!

I represent the Yu Jing forces with my Japanese army sectorial and you can check out my battle reports and profile here.

Well with that you're all caught up on my hobby times. Thanks so much for looking! 😄